MIL-DTL-8790
Hose Assembly Nonme
Description
Procurement notes for MIL-DTL-8790.
Hose Assembly Nonme ASAP can support availability checks, alternate review, lead-time confirmation, and documentation requirements tied to the part number, NSN, CAGE code, or active bill of materials.
Catalog classifications
NSN Information for Part Number MIL-DTL-8790 with NSN 4720-00-028-9604, 4720000289604
Characteristics Data of NSN 4720-00-028-9604, 4720000289604
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AARX | INSIDE DIAMETER | 0.219 INCHES NOMINAL |
| ABKV | OUTSIDE DIAMETER | 0.250 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQBD | BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE AND 1ST LAYER BRAIDED STEEL WIRE |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| CQRB | SEAT ANGLE | 12.0 DEGREES 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 25.000 INCHES NOMINAL WORKING |
| MEDA | MEDIA FOR WHICH DESIGNED | AIR AND ALCOHOL, ETHYL AND FUEL/OIL, HYDROCARBON AND WATER, FRESH SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| ZZZK | SPECIFICATION/STANDARD DATA | 96906-MS28762 GOVERNMENT STANDARD |