3040NR0260
Shaft Shouldered
Description
Procurement notes for 3040NR0260.
Shaft Shouldered ASAP can support availability checks, alternate review, lead-time confirmation, and documentation requirements tied to the part number, NSN, CAGE code, or active bill of materials.
Catalog classifications
NSN Information for Part Number 3040NR0260 with NSN 3040-00-491-3602, 3040004913602
Characteristics Data of NSN 3040-00-491-3602, 3040004913602
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | UNTHREADED CROSS DRILLED |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | WOODRUFF KEYWAY AND CIRCULAR GROOVED |
| AAHW | SECOND END GROOVE WIDTH | 0.0390 INCHES MINIMUM AND 0.0420 INCHES MAXIMUM |
| AAHX | SECOND END GROOVE DIAMETER | 0.5810 INCHES MINIMUM AND 0.5910 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 8.375 INCHES NOMINAL |
| AMDX | FIRST END HOLE DIAMETER | 0.2660 INCHES NOMINAL |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.375 INCHES NOMINAL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.094 INCHES NOMINAL |
| AMFR | SECOND END KEYWAY WIDTH | 0.1240 INCHES MINIMUM AND 0.1255 INCHES MAXIMUM |
| AMFS | SECOND END EXTERNAL KEYWAY LENGTH | 0.500 INCHES MINIMUM AND 0.518 INCHES MAXIMUM |
| AMFW | SECOND END DISTANCE FROM KEYWAY CENTER TO END | 1.437 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| CSPY | LARGEST STEP DIAMETER | 0.620 INCHES MINIMUM AND 0.622 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| FEAT | SPECIAL FEATURES | KA MAGNETIC PERMEABILITY SHALL BE LESS THAN 1.2 BEFORE FABRICATION AND NOT GREATER THAN 2.0 AFTER FABRICATION AS MEASURED IN A 200 OERSTED FIELD BY A PERMEABILITY INDICATOR SPECIFIED IN MILITARY SPEC MIL-I-17214 |
| MATT | MATERIAL | STEEL COMP 316 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SPECIAL FEATURES |