SS46C02A130000
Hose Assembly Nonme
Pricing in 15 minutes.
- I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
- ASAP Semiconductor is a wholly independent aftermarket parts distributor.
- This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
Procurement notes for SS46C02A130000.
Hose Assembly Nonme ASAP can support availability checks, alternate review, lead-time confirmation, and documentation requirements tied to the part number, NSN, CAGE code, or active bill of materials.
Catalog classifications
NSN Information for Part Number SS46C02A130000 with NSN 4720-00-943-1454, 4720009431454
Characteristics Data of NSN 4720-00-943-1454, 4720009431454
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B 1ST END |
| AAJD | THREAD CLASS | 3B 2ND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AARX | INSIDE DIAMETER | 0.212 INCHES NOMINAL |
| ABKV | OUTSIDE DIAMETER | 0.505 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| AHNC | CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END |
| AHNC | CONNECTION STYLE | SWIVEL NUT, FLARELESS 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CMLP | THREAD QUANTITY PER INCH | 20 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 20 2ND END |
| CQBD | BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 2ND END |
| CQRB | SEAT ANGLE | 12.0 DEGREES 1ST END |
| CQRB | SEAT ANGLE | 12.0 DEGREES 2ND END |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 13.000 INCHES NOMINAL WORKING |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END |